If your basement floor drain is clogged, there are a few things you can do to unclog it. First, try using a plunger. If that doesn’t work, you can try using a plumber’s snake.

If neither of those work, you may need to call a professional plumber.

Contents

HOW TO UNCLOG FLOOR DRAIN THAT IS BACKING UP DOWN IN BASEMENT

  • Clear any debris from around the floor drain
  • This will make it easier to access the drain and unclog it
  • Pour a cup of hot water down the floor drain
  • This will help to loosen any clogs that may be in the drain
  • Use a plunger to try and dislodge any clogs in the drain
  • Plunging up and down several times should do the trick
  • If plunging does not work, you can try using a plumbers’ snake or auger to reach deep into the drain and break up any clogs that are further down

How to Unclog a Floor Drain With Standing Water

If your floor drain is clogged and there’s standing water in it, don’t despair! There are a few things you can do to unclog the drain and get rid of the water. Here’s what you need to know.

First, if the water is not too deep, you can try using a plunger to unclog the drain. Put the plunger over the drain and push and pull it up and down vigorously. This may take a few minutes, but if it works, the standing water will start to disappear.

If the plunger doesn’t work or if the water is too deep for it to be effective, you’ll need to use a plumber’s snake. This is a long, flexible piece of equipment that can be inserted into the drain to clear away any obstructions. You can usually find a plumber’s snake at your local hardware store.

Once you’ve cleared the clog with either a plunger or a plumber’s snake, you should pour some boiling water down the drain to help loosen any remaining debris. Then run some cold water through the drain for several minutes to flush everything out. If your floor drain is still clogged after trying these methods, you may need to call a professional plumber for help.

But in most cases, you should be able to get rid of that standing water on your own!

How to Unclog Basement Floor Drain Video

If your basement floor drain is clogged, it can be a real pain. Not only is it difficult to access, but trying to unclog it yourself can be frustrating and messy. Luckily, there’s a video that can help.

In this video from This Old House, host Kevin O’Connor shows how to clear a clogged basement floor drain. He starts by removing the grate and then uses a plumbing snake to break up the clog. Next, he flushes the drain with a hose to clear any remaining debris.

Finally, he replaces the grate and tests the drain to make sure it’s working properly. If you’re having trouble with your basement floor drain, this video is definitely worth a watch. With Kevin’s help, you’ll have that drain unclogged in no time!

Basement Drain Backing Up When Washing Clothes

If your basement drain backs up when you washing clothes, there are a few things that could be causing the issue. First, check to see if the washer is draining properly. If it is, then the problem is likely with the sewer line or septic tank.

You will need to have a professional come out and take a look at the problem before it can be fixed.

Basement Floor Drain Backing Up With Poop

If your basement floor drain is backing up with poop, it’s likely because there’s a blockage in the sewer line. This can happen for a number of reasons, including tree roots growing into the sewer line or a buildup of grease and debris. If you have a basement floor drain that’s backing up with poop, the first thing you should do is call a professional plumber.

They’ll be able to diagnose the problem and clear the blockage so that your drain starts working properly again.

How to Unclog Floor Drain

If your floor drain is clogged, don’t panic! There are a few simple things you can do to unclog it. First, try using a plunger.

If that doesn’t work, you can try using a plumbers’ snake. If neither of those work, you may need to call a professional. Here’s how to use a plunger: Wet the plunger and place it over the drain opening.

Push and pull the plunger up and down vigorously for 30 seconds or so. Remove the plunger and see if water is draining from the drain. If it is, then congratulations- you’ve unclogged your floor drain!

If plunging doesn’t work, then it’s time to try using a plumbers’ snake. A plumbers’ snake is a long, flexible piece of metal with a spiral tip that helps it break through blockages. To use one, insert the tip of the snake into the drain opening and push it down until you feel resistance.

Then turn the handle clockwise to spin the tip of the snake and help break through the clog. Once you’ve broken through, keep turning until you feel resistance again- this time from the other side of the pipe (this means thatthe clog has been cleared). Removethe snake and run water throughthe drainto make sureit’s clear before replacingthe grateoverthe drainopening.

How to Unclog Basement Floor Drain?

Credit: www.reddit.com

Why is My Basement Floor Drain Backing Up?

If your basement floor drain is backing up, it’s likely because there’s a blockage in the pipe. This can be caused by anything from leaves and debris to grease and hair. If you have a blockage, you’ll need to clear it out before the water will start draining properly again.

There are a few ways you can go about clearing a blocked pipe. One option is to use a plunger. Put the plunger over the drain and push and pull until the water starts flowing again.

You may need to do this several times before the blockage is completely cleared. Another option is to use a plumber’s snake. This is a long, flexible piece of equipment that can reach deep into the pipes to clear out any obstructions.

If you’re not comfortable using a snake yourself, you can always call in a professional plumber to do the job for you. Once you’ve cleared the blockage, take steps to prevent it from happening again. Keep your drains clean by regularly scrubbing them with hot soapy water or a mixture of baking soda and vinegar.

And be careful what goes down your drains – avoid dumping grease, coffee grounds, hair, or other debris into them.

Can I Snake a Basement Floor Drain?

Yes, you can snake a basement floor drain. There are a few things to keep in mind when doing so, however. First, make sure that the power is off to the area where you’ll be working.

Second, clear any debris from around the drain so that you have a clear path to work with. Third, understand how your particular model of snake works before beginning; this will help you avoid damaging the equipment or causing injury to yourself. Finally, always use caution and go slowly when feeding the snake into the drain, as there is potential for it to get stuck if not done carefully.

With these tips in mind, snaking a basement floor drain should be a relatively simple and straightforward process.

Can You Use Drano in Basement Floor Drain?

If your basement floor drain is clogged, you may be wondering if you can use Drano to clear it. The short answer is yes, you can use Drano in a basement floor drain. However, there are a few things you should keep in mind before using this product.

First, make sure that the clog is actually in the drain and not further down the piping. If the clog is further down the piping, using Drano will not be effective and could even damage your pipes. Second, be aware that using Drano can be dangerous if not used correctly.

Always follow the instructions on the label and take care to avoid contact with skin or eyes. Finally, keep in mind that while Drano can be effective at clearing a clog, it is not a permanent solution. If your basement floor drain frequently becomes clogged, there may be another issue at play such as a broken pipe or tree roots growing into your piping.

In these cases, it is best to consult with a professional plumber to diagnose and resolve the problem.

Why is the Drain in My Basement Not Draining?

If your basement drain is not draining, it is most likely due to a clog in the drain line. The first thing you should do is check to see if the drain is clear. If it is, then the problem may be with the sewer line or septic tank.

If the drain is not clear, you will need to remove the clog. There are a few ways to do this: 1. Use a plunger to try and dislodge the clog.

2. Use a plumber’s snake or auger to reach down into the drain and break up the clog manually. 3. Pour boiling water down the drain to melt any grease or other organic material that may be causing the blockage. 4. Call a professional plumber to have them clear the blockage for you.

Conclusion

If your basement floor drain is clogged, don’t despair! There are a few easy ways to unclog it. First, try using a plunger.

If that doesn’t work, you can try using a plumber’s snake. If neither of those work, you can always call a professional plumber.