If your basement walls are made of concrete, they may be preventing your home from looking its best. There are a few ways that you can cover up these concrete walls to make your basement look nicer. One option is to use paneling.

You can find paneling at most hardware stores. Another option is to paint the concrete walls. This may take some time and effort, but it will be worth it in the end.

Contents

How to Prep, Prime, & Paint Concrete Foundations | DIY Home Improvement

  • Clear the wall of any debris or objects that may be in the way
  • Choose the type of covering you would like to use
  • Some common options include paneling, painting, or using a textured wallpaper
  • Affix the chosen covering to the wall using nails, screws, or adhesive strips depending on what is recommended for your particular material
  • Make sure that the covering is securely attached and there are no gaps or areas where it does not lay flush against the concrete wall

Cheapest Way to Cover Concrete Walls

If you’re looking for a cheap way to cover concrete walls, there are a few options available to you. Painting is one of the most popular and inexpensive ways to cover up concrete walls. You can either paint them yourself or hire someone to do it for you.

If you’re not into painting, another option is to use wallpaper. This can be a bit more expensive than painting, but it’s also much easier to apply and remove. There are also various types of paneling that you can use to cover concrete walls.

This is a more permanent solution, but it can be quite costly. Whatever route you decide to go, make sure you take the time toprepare the surface properly before applying any type of covering.

Finishing Basement Walls Without Drywall

If you’re looking to finish your basement but don’t want to deal with the hassle of drywall, there are a few other options available to you. One popular option is painting the walls with a waterproof paint. This will help protect your basement from moisture and mold and will also give it a finished look.

Another option is paneling the walls with plywood or hardboard panels. This is a more traditional approach and can give your basement a cozy, cabin-like feel. Whichever route you choose, make sure to properly seal all cracks and gaps in the walls to prevent any moisture or pests from coming in.

Interior Concrete Wall Covering Ideas

Interior concrete walls can be an eyesore. But with a little creativity, they can also be turned into a stunning feature in your home. Here are some interior concrete wall covering ideas to get you started:

1. Paint them. This is probably the most popular option when it comes to covering up interior concrete walls. You can go for a solid color, or get creative with patterns and designs.

Just make sure to use a paint that’s suitable for concrete surfaces. 2. Hang tapestries or fabric panels. If painting isn’t your thing, you can always cover up those pesky concrete walls with tapestries or fabric panels.

This is a great way to add some color and personality to your space without having to commit to anything permanent. 3. Put up wallpaper. Wallpaper is another great way to dress up boring concrete walls.

There are tons of different styles and designs to choose from, so you’re sure to find something that fits your taste and style perfectly. 4. Install wainscoting or paneling . Wainscoting or paneling is a great way to add some visual interest to plain old concrete walls .

You can go for a traditional look, or opt for something more modern . Either way , this is a great way to transform the look of any room in your home . 5 Use faux stone veneer .

Faux stone veneer gives the illusion of real stone without all the hassle (and expense) of using actual stone . It’s easy 6to install , and it comes in a variety of colors and styles that will fit any space perfectly 7 Add floating shelves Floating shelves are not only stylish , but they’re also functional . They provide extra storage space without taking up too much visual real estate . And since they don’t require any brackets or supports , they’re perfect for concealing unsightly wires and cords 8 Cover them with chalkboard paint Chalkboard paint is all the rage these days , and for good reason !

Ideas to Cover Concrete Walls

cover concrete walls – If your home has concrete walls, you may be wondering how to best cover them. Here are some ideas to get you started! Paint is always an option for covering up concrete walls.

You can use a solid color or go for something more creative with a pattern or mural. If you decide to paint, make sure to use a primer designed for concrete first. This will help the paint stick better and last longer.

Tile is another popular option for covering concrete walls. You can use tile on the entire wall or just in sections as accents. Tile comes in many different colors, shapes, and sizes, so you’re sure to find something that fits your style.

Just like with paint, be sure to use a mortar designed specifically for tile before applying it to the wall. Wood paneling is another way to cover up concrete walls. You can find wood paneling at most home improvement stores.

It’s easy to install and comes in a variety of styles and colors. Once again, be sure to use a primer made specifically for wood paneling before attaching it to the wall. Fabric is yet another option for covering concrete walls.

This is especially helpful if you live in an apartment and aren’t allowed to make any permanent changes to the walls.

How to Smooth Concrete Basement Walls

If your basement walls are made of concrete, you may notice that they are not as smooth as you would like them to be. There are a few ways that you can smooth out your concrete basement walls so that they look better and are easier to clean. One way to smooth out your concrete basement walls is to use a power washer.

You will want to start with the lowest setting on the power washer and work your way up until you find one that removes the majority of the imperfections in the concrete. Be sure to hold the power washer at least 12 inches away from the wall so that you do not damage it. Another way to smooth out your concrete basement walls is to use a chemical stripper.

This will remove any paint or other materials that may be on the surface of the concrete. Be sure to follow the directions on the chemical stripper so that you do not damage the concrete. Once you have removed all of the materials from the surface of the concrete, you can then sand it down with a fine-grit sandpaper until it is smooth.

How to Cover Concrete Walls in Basement?

Credit: validhouse.com

How Do You Cover Concrete Walls in a Basement Without Drywall?

If your concrete basement walls are in good condition, you may be able to cover them with a product called DRYLOK. This is a masonry waterproofing paint that can be applied directly to concrete, and it will create a barrier against moisture. You can then apply a finish of your choice over the DRYLOK, such as drywall or paneling.

If your concrete walls are not in good condition, you may need to repair them before covering them. This could involve filling cracks with hydraulic cement, patching holes with mortar, and/or applying a layer of fibrous reinforcement matting. Once your walls are repaired, you can then proceed with painting them with DRYLOK or another masonry waterproofing paint.

How Can I Make My Concrete Basement Walls Look Better?

There are a number of ways you can make your concrete basement walls look better. One way is to use a concrete sealer. This will help to protect the concrete from staining and will also give it a nice shine.

Another way to improve the appearance of your concrete basement walls is to paint them. You can either paint them yourself or hire a professional to do it for you. If you decide to paint your concrete basement walls yourself, be sure to use a waterproofing sealer before painting so that the paint will not peel off later on.

What is the Cheapest Way to Finish a Basement Wall?

If you’re looking for the cheapest way to finish your basement walls, there are a few options available to you. One option is to use paneling. This is a relatively inexpensive option and can be found at most home improvement stores.

Another option is to use paintable wallpaper. This option is also relatively inexpensive and can give your basement walls a finished look without breaking the bank. Finally, if you’re willing to spend a little more money, you could consider using drywall.

Drywall is more expensive than paneling or wallpaper, but it’s also more durable and will last longer. Whichever option you choose, make sure to do your research and compare prices before making your final decision.

How Do You Cover a Basement Foundation Wall?

Foundation walls are an important part of your home’s structure. They support the weight of your house and help keep it level. If you have a basement, the foundation walls also support the weight of the floors and roof above.

If your foundation walls are made of concrete, they will eventually crack and start to leak water. To prevent this from happening, you need to cover them with a waterproofing material. There are several different types of waterproofing materials available, but the most common is a sheet of plastic or rubber that is installed on the outside of the wall.

This type of waterproofing is called an exterior drainage system. Another type of waterproofing is called an interior drain tile system. This system uses a network of pipes to collect water that leaks through the cracks in the foundation wall and redirect it to a sump pump that removes it from your home.

The best way to protect your foundation walls is to have them professionally inspected every few years and repaired if necessary. By taking these preventive measures, you can avoid costly repairs down the road and extend the life of your home’s foundation.

Conclusion

If you’re looking for a way to cover up those concrete walls in your basement, there are a few options available to you. You can paint the walls, hang wallpaper, or even put up wood paneling. Whatever route you decide to go, make sure you take the time to properly prepare the surface before starting your project.