Building wood shelves in a closet is a great way to add extra storage space. The process is relatively simple and only requires a few tools. First, measure the dimensions of the area where the shelves will be installed.

Then, cut the lumber to size and sand the edges smooth. Next, predrill holes for the shelf brackets and attach them to the wall. Finally, install the shelves by screwing them into the brackets.

  • Decide where in the closet you want to build the shelves
  • Measure the width and height of the space and mark the location of the studs in the walls
  • Cut boards to size for each shelf, using a power saw
  • Sand down any rough edges on the boards
  • Attach brackets to each board at both ends, using screws and a drill
  • Make sure that the brackets are level with each other before attaching them to the wall
  • Hang the shelves on the wall by screwing into the studs at marked locations
  • Use screws that are long enough to go through both the board and into the studs for added stability


Simple Pantry Shelving

How to Add Shelves to a Closet Without Drilling

Adding shelves to a closet is a great way to add extra storage space without drilling holes in the wall. There are a few different ways that you can do this, and each has its own set of benefits. One option is to use heavy duty adhesive strips.

These strips will hold up well, even if you have heavier items on the shelves. However, they can be difficult to remove if you decide to change things up later on. Another option is to use screw-in brackets.

These are easy to install and remove, but they may not be as strong as the adhesive strips. If you’re worried about the weight of your items, you may want to go with this option. Finally, there are also magnetic shelves that you can purchase.

These are very easy to install and won’t damage your walls at all. However, they might not be able to hold as much weight as the other options. No matter which option you choose, adding shelves to your closet is a great way to get more storage space without having to drill holes in the wall.

How to Add More Shelves to a Closet

Closets are often one of the first places that people look when they are trying to find more storage space in their home. Unfortunately, many closets are not very well organized and can be quite cluttered. One way to add more storage space to a closet is by adding more shelves.

There are a few things to consider when adding shelves to a closet. First, it is important to measure the space that is available and determine how many shelves can fit comfortably. It is also important to consider what will be stored on the shelves and choose shelving accordingly.

For example, if heavy items will be stored on the shelves, it may be necessary to use stronger materials such as plywood or metal. Once you have chosen the material for your new shelves, it is time to install them. If you are not comfortable doing this yourself, there are plenty of tutorials online or you can hire a professional.

Once the new shelves are installed, take some time to organize your closet so that everything has its own place and everything is easily accessible.

Building Closet Shelves Plywood

Building closet shelves from plywood is a relatively easy and inexpensive project that can add a lot of storage space to your home. Here are some tips for building sturdy and attractive shelves: 1. Cut the plywood into pieces that will fit snugly inside your closet.

If you’re not sure of the measurements, it’s better to err on the side of too large rather than too small. 2. Attach furring strips to the back of the plywood using screws or nails. This will give the shelves some extra support.

3. Cover the front edges of the plywood with veneer tape or molding to create a finished look. 4. Paint or stain the shelves as desired before attaching them to the wall using brackets or screws. With these simple tips, you can build beautiful and functional closet shelves that will help keep your home organized and tidy!

How to Build Closet Shelves With Mdf

MDF is an excellent material for building closet shelves because it is strong, yet lightweight. It can be cut to any desired size and shape, making it very versatile. MDF is also relatively inexpensive, so it is a good option if you are working with a tight budget.

Building closet shelves with MDF is not difficult, but there are a few things you need to keep in mind. First, when cutting MDF, always use a sharp blade as dull blades can cause the material to chip or splinter. Second, MDF should always be sanded before painting or staining to create a smooth surface.

Finally, when attaching MDF to walls or other surfaces, use screws rather than nails to avoid splitting the material. With these tips in mind, you should have no trouble creating beautiful and functional closet shelves using MDF!

How to Build Wood Shelves in a Closet?


How Do You Make Wooden Shelves in a Closet?

Assuming you would like tips on how to make shelves in a closet out of wood: First, use a stud finder to mark where the wooden boards can be attached to the wall. It is important to attach the boards directly into the studs so that the shelving is secure.

Then, cut your wood planks to size and sand down any rough edges. Once the boards are ready, apply a coat of paint or stain (if desired). Now it’s time to attach the boards to the wall.

Begin by attaching brackets (or L-brackets) at each end of the shelves. Make sure that the brackets are level before screwing them into place. Then, using screws or nails, attach each board directly into the brackets.

Repeat this process until all shelves are installed. And that’s it! You’ve now successfully installed wooden shelves in your closet – congrats!

How Do You Make a Homemade Closet Shelf?

Assuming you would like tips on how to build a wooden closet shelf: Building a wooden closet shelf is a fairly easy and straightforward process. Here are some tips to help you get started:

1. Start by measuring the space where you want to add the new shelf. This will give you an idea of how big or small to make your shelf. 2. Cut your lumber to size using a saw.

Make sure all of your cuts are straight and even. 3. Drill pilot holes in the boards that will make up the sides of your shelf. This will make it easier to screw everything together later on.

4. Assemble the frame of your shelf using screws and/or nails (depending on what type of fastener you’re using). Be sure to predrill any holes if you’re using nails so they don’t split the wood when driven in. 5. If desired, add supports in the middle of your frame for extra stability (this is especially important if your shelf will be holding heavier items).

6 . Once the frame is complete, sand down any rough edges and finish as desired (stain, paint, etc.). 7 .

Attach your finished frame to the wall using screws or brackets (again, depending on what type of fastener you’re using). Make sure it is level before attaching so that your items will sit evenly on the surface once it’s installed.

What Kind of Wood Should I Use for Closet Shelves?

There are a few things to consider when deciding what type of wood to use for closet shelves. The first is the weight of the items that will be stored on the shelves. If the items are heavy, then a stronger and thicker wood should be used.

The second is the level of moisture in the closet. If it is a high moisture area, then a rot resistant wood like cedar or redwood should be used. Lastly, consider the budget for the project and choose a wood accordingly.

Pine is a popular choice for closet shelves because it is inexpensive and easy to work with. However, pine is not as strong as some other woods and can warp or sag over time under heavy weights. Oak is another popular choice because it is strong and durable, but it can be more expensive than pine.

Cedar is often used in closets because it has natural resistance to rot and pests, making it ideal for moist environments. Redwood is also rot resistant and has a beautiful grain pattern, but it can be one of the more expensive woods to use.

How Do You Build Closet Shelves to Fit Perfectly?

Building closet shelves to fit perfectly can be a challenge, but there are a few things you can do to make the process easier. First, take some time to measure the space you have available. Then, use those measurements to create a template for your shelves.

Once you have your template, cut the pieces of wood or other material you’ll be using to create the shelves. Next, it’s time to assemble the shelves. If you’re using wood, this will involve attaching brackets or supports to the back of each shelf.

With wire shelving, you’ll need to connect the individual shelves together using clips or similar attachments. Finally, once everything is in place, test out the fit by putting some weight on each shelf (books work well for this). If everything seems sturdy and level, then congratulations – you’ve built yourself some perfect fitting closet shelves!


If you’re looking for a way to add some extra storage space to your home, building wood shelves in a closet is a great option. With some basic carpentry skills and a few tools, you can easily build shelves that are both functional and attractive. Start by measuring the dimensions of your closet and deciding how many shelves you want to build.

Then, cut the boards to size and assemble them using screws or nails. For a more finished look, sand the edges of the boards and paint or stain them before attaching them to the wall. Building wood shelves in a closet is a relatively simple project that anyone can do with just a few tools and some basic carpentry skills.

By taking the time to measure carefully and cutting the boards to size, you can create sturdy shelves that will provide extra storage space for years to come.